Product Instruction

• The instrument must be placed on a stable table before use;
• It is not allowed to move the machine during use;
• Select the corresponding power supply voltage, which shall not be too high to avoid burning the device;
• In case of any abnormality of the instrument, please contact the Institute for timely handling;
• There must be a good ventilation environment when the machine is working.
• For the components of the key press machine, please add lubricating oil to the mechanical part in time due to the large operating load;
• After each test, clean the drop impact testing machine and keep it clean;
• The control box must be wiped with a dry cloth instead of a wet cloth.

Technical Parameters

1. Mass of hammer 1000g
2. Punch head diameter 8mm
3. Three impact test height specifications: 50cm/100cm/120cm
4. Total weight: 10kg/15kg/20kg
5. Base size: 210MM * 210MM * 200MM

Drop Impact Testing Machine Features

• The paint film impact tester includes a 50cm/100cm/120cm calibration tube, base, 1000g hammer, and the middle of the calibration tube
• There is a groove with a scale, and the heavy hammer falls through the hollow pipe. The standard number of scales beside the groove indicates that when the hammer falls
• The expected reading. The instrument base contains a mold base support, and when the weight falls, it will hit a punch with a diameter of 8mm below
• The size of the punch corresponds to the die opening of the base; It can prevent the test plate from being subjected to a shear force at the inner edge of the mold base.
• The indentation depth of the coating surface of the test plate by the falling weight depends on the weight and height of the falling ball.

Drop Impact Tester Applications

1. The paint film impact tester is designed according to GB/T1732-93 for testing paint film coatings on metal substrates.
2. The standard weight falls on the test sample plate of the coating layer at a certain height to observe the maximum height that will not cause damage to the coating film.