- Ceramic
- Mosaic
- Cement mortar
Sold out
Roll over or click image to zoom in
Ceramic Unglazed Brick Wear Resistance Tester
$0.00
customers are viewing this product
The wear resistance tester is mainly composed of a spindle drive system, weight lever system, oil box and heater, friction measurement system, and industrial all-in-one machine programmable terminal (which can preset, control, alarm, and display friction, speed, time, temperature, and other parameters), electrical control system, the current solid system, and other parts. All these are installed on the frame with the base as the main body.
Product Specification
|
Grinding wheel speed:
|
75r/min
|
|
Grinding Wheel 1:
|
Diameter 200±0.2mm, thickness 10±0.1mm, E235A or Fe360A steel for GB/T3810.6-2016
|
|
Grinding wheel 2:
|
Diameter 200±0.2mm, thickness 70±0.1mm,45 steel, hardness HB203-245, suitable for GB/T12988-2009
|
|
Pressure weight 1:
|
the mass of 2.5kg, applicable to GB/T3810.6-2016
|
|
Pressure weight 2:
|
the mass of 14kg, GB/T12988-2009
|
|
The abrasive is F80 corundum abrasive.
|
|
|
Storage hopper volume is greater than 5L
|
|
|
The test time can be a preset digital display
|
|
Working Principle
The instrument comprises power transmission, sample fixture, abrasive storage, and electrical control. The grinding wheel rotates constantly. The sample contacts the friction steel wheel with a certain pressure through the pressure weight. The abrasive enters the grinding area evenly according to the specified flow rate (100g/100r/±10g/100r). The grinding pit is generated on the sample’s surface under the abrasive action. By measuring the specimen surface of the grinding chord length (accurate to 0.5 mm), calculate the grinding volume to indicate the wear degree of the specimen. Each sample was evaluated by the average wear volume of the two parts.
