Sold out
Roll over or click image to zoom in

Refrigerator Door Open-Close Tester

ots
Out of stock
$0.00
customers are viewing this product

This machine is used for the refrigerator and freezer cover or door interlock device durability test and lock tensile test to verify the reliability of the interlock device. It is also used to assist other tests for repeated opening and closing of doors, such as the defrosting test and refrigerant leak test.

Test principle of Refrigerator Door Opening and Closing Testing Machine

The mechanical arm is driven by the motor/cylinder to drive the door or cover (drawer) caught by the vacuum sucker to open and close at a certain speed, so as to verify the reliability of the interlock device. The force sensor can be installed on the optional mechanical arm to form a closed-loop control with the servo motor, which can accurately control and measure the opening force value.

Specification

  1. Electrical control mode: PLC intelligent integrated control, with 7-inch touch interface operation
  2. Drive mode: servo motor + reducer
  3. Sample holding method: A vacuum suction cup adsorption door is used to ensure that the durability test does not fall off (vacuum suction cup with a vacuum generator, with strong adsorption force, better than ordinary suction cups, not easy to fall off)
  4. Opening and closing speed: 0-10 times/minute
  5. Opening and closing Angle: 0-120° touch screen setting, adjustable (or specified Angle)
  6. Test times: 0-99999999 times, can be preset
  7. Equipment size: 2800×1400×2440mm
  8. Power supply: 220V 50HZ, 1KW
  9. Please connect with the air source:0.7mPa if marked.

    Test steps

    1. Open the test arm and install the suction cups.
    2. Set the original Angle of the test arm.
    3. Set the test parameters, open Angle, test maximum force value, open speed, etc.
    4. Start testing.
    5. The test is complete.


    Maintenance

    1. Pay attention to each key. Please gently press and release.
    2. When the machine is working, the power should be grounded with three plugs and the power should be cut off when it is not working.
    3. The machine should be placed in the laboratory, and the ground should be kept dry and smooth.

Refrigerator Door Open-Close Tester
You have successfully subscribed!